WSDMAVIS 10Pcs Multifunction Delay Trigger Chip IC Timing 2s-1000h Timing Module

EGP149.00

Chip features: 1. Using CMOS technology, low power consumption, lead-free and environmentally friendly. 2. Output low level can directly push LED (please add current limiting resistor), output high level can push transistor (please add current limiting resistor). 3. Resistor can be used to adjust the timing time. There are 8*N (N=0.1.2.3) times timing options, and […]

1 in stock

SKU: PA-6KAY-NQRJ

Description

Chip features:
1. Using CMOS technology, low power consumption, lead-free and environmentally friendly.
2. Output low level can directly push LED (please add current limiting resistor), output high level can push transistor (please add current limiting resistor).
3. Resistor can be used to adjust the timing time. There are 8*N (N=0.1.2.3) times timing options, and the time can be adjusted from 2s-1000h.
4. You can choose trigger timing and trigger terminal grounding power-on timing.
5. Standby output high level, falling edge trigger, output low level after triggering, and return to high level after the delay is over.

Pin description:
The following figure counts from bottom to top: PIN1=power negative, PIN2=trigger, PIN3=output, PIN4=power positive
The P1 short circuit (short circuit of two small pads) in the figure below is the timing time equal to the time in the resistance meter multiplied by 8 times
The P2 short-circuit (short-circuit of two small pads) in the figure below is equal to the time in the resistance meter multiplied by 64 times
In the figure below, P1 and P2 are short-circuited at the same time (two small pads are short-circuited). The timing time is equal to the time in the resistance meter multiplied by 512 times

Package Includes: 10Pcs

Additional information

Weight 0.02 kg
Dimensions 0.71 × 7.9 × 12.09 cm