QEBIDUM 2 Pack LM2596 Buck Converter, Switching Regulator Module DC to DC Voltage Step Down Synchronous Adjustable 36V 24V to 12V 5V DIY LM2596S Power Supply Stabilizer Circuit with LED Display

Description

Voltage display adjustable buck module DC / DC power module Features:
1. With a voltmeter shows that the voltmeter error ± 0.1V, range 0-40V. (Note: To ensure the accuracy of the voltmeter, please ensure that the input voltage above 4V).
2. Touch the button to switch the measurement input or output voltage, and the indicator shows which voltage is being measured.
3. With power-down memory function, after power on the last measured voltage value that way.
4. Long press the touch button for 3 seconds to turn off the LED display, touch the button again to open the LED display.
5. With terminals, no iron can also be easy to use, and to keep the wire bonding point.
6. Input voltage 4.0-40V (input voltage must be higher than the output voltage to be more than 1.5v.)
7. Adjustable output voltage range 1.25V-37V continuously adjustable (input voltage must be higher than the output voltage of about 1.5V).
8. The maximum output current up to 3A, normal and stable operating current at 2A.
9. Using 150KHz internal oscillation frequency, belonging to the second generation switching voltage regulator, low power consumption, high efficiency.
With overheat protection and short circuit protection.

Specifications:
Module Model:LM2596 Buck Converter + Voltmeter
Ripple Frequency: About 150Khz
Ripple Peak: About 100mV
LED Display Color: Red
Voltage Meter Error: ± 0.1V
Measure Range: 4~40V
Static Power: 20mAh
Size: 66mm x 34mm x 14mm
Weight: 25g

Wiring connection:
IN+: connect IN+ to your Input Positive
IN-: connect IN- to your Input Negative
Out+: connect OUT+ to your Output Positive
Out-: connect OUT- to your Output Negative

Step Down Regulator Package Include:
2 x lm2596 modules